22
4. OPERATION PROCEDURE
Auto Start Operation
AUTO START (Automatic Start) mode utilizes timer or clock to automatically begin an operation.
Operation must be stopped manually.
Timer launch
Operation start (automatic)
SV: Temperature setting,
t: Auto start time (time)
Set Auto Start mode
1 Turn on power.
Turn ON (
｜
) main power switch (ELB) located on
lower-right side panel of unit. (idle)
Press and hold to turn on control power.
(standby)
Current temperature reading is shown in upper display,
Temperature setting is shown in lower display.
Fan begins running (runs when door is closed and stops
whenever door is opened).
2 Select Automatic Start mode
Press
repeatedly until both FIXED TEMP and
AUTO START lamps light.
Constant Temperature mode (FIXED TEMP) is
factory default. Once mode has been changed,
the last mode run will be selected on subsequent
startups.
3 Set temperature and start timer/
clock.
1) Press
.
2) Select start TIME or CLOCK (lamp in upper-left
of lower display) using
and press
.
3) Set TIME (range: 0
～
99hr
：
59min) or CLOCK
(24-hour time system) in upper display and
press
.
4) Set temperature in lower display and press
.
t
SV
V
