17
4. OPERATION PROCEDURE
Constant Tempe Quick Auto Stop Operation
6 Set timer
The quick auto stop function is used to automatically stop
constant temperature operation at a certain time (by clock)
or after a desired duration (by timer).
(decided during
operation).
1) Press with constant temperature operation in
progress.
2)
is shown in lower display. “TIME” lamp
(top-left in lower display) flashes.
3) Select TIME (timer) or CLOCK using and
press .
4) Set TIME (setting range: 0~99hr
：
59min) or
CLOCK (24-hour time system) in upper display and
press .
Example 1.
Quick Auto Stop function set to timer:
Operation stops automatically 35 hours and 30 minutes
after temperature setting is reached
.
Example 2.
Quick Auto Stop function set to clock:
Operation stops automatically at 15:00 (3:00PM).
5) AUTO STOP lamp lights and Auto Stop function
begins.
Press at any time during operation to monitor
remaining time in the lower display.
R
emaining time display (timer):
Stop time display (clock):
Press
again or wait about 10 seconds for
screen to return to initial screen.
