Yamaha YZF-R1 2000, Supplementary Service Manual

Page: 63 / 78

–55–
1 Speedometer
2 Odometer / tripmeter / fuel reserve tripmeter /
clock
3 “RESET” button
4 “SELECT” button
INSTRUMENT FUNCTIONS
ELEC
NOTE:
SPEEDOMETER UNIT
The speedometer unit is equipped with the fol-
lowing:
a digital speedometer (which shows riding
speed)
an odometer (which shows the total distance
traveled)
two tripmeters (which show the distance
traveled since they were last set to zero)
a fuel reserve tripmeter (which shows the di-
stance traveled on the fuel reserve)
a clock
Odometer and tripmeter modes
Pushing the “SELECT” button switches the dis-
play between the odometer mode “ODO” and
the tripmeter modes “TRIP 1” and “TRIP 2” in
the following order:
ODO
TRIP 1 TRIP 2 ODO
If the fuel level warning light comes on (see
page 3-2), the odometer display will automati-
cally change to the fuel reserve tripmeter mode
“TRIP F” and start counting the distance trav-
eled from that point. In that case, pushing the
“SELECT” button switches the display between
the various tripmeter and odometer modes in
the following order:
TRIP F
TRIP 1 TRIP 2 ODO TRIP F
To reset a tripmeter, select it by pushing the “SE-
LECT” button, and then push the “RESET” but-
ton. If you do not reset the fuel reserve tripmeter
manually, it will reset itself automatically and the
display will return to “TRIP 1” after refueling and
traveling 5 km.
After resetting the fuel reserve tripmeter, the
display will return to “TRIP 1”, unless a different
mode had been previously selected; in that
case, the display automatically returns to the
prior mode.