
–34–
PERIODIC MAINTENANCE AND
LUBRICATION INTERVALS
CHK
ADJ
NOTE:
No
ITEM
CHECKS AND MAINTENANCE JOBS
After the
first
Every
Every
Annual
No.
ITEM
CHECKS AND MAINTENANCE JOBS
first
1,000 km
10,000 km
20,000 km
check
16 *
Chassis
fasteners
S
Make sure that all nuts, bolts and screws are properly
tightened.
S
Tighten if necessary.
17
Sidestand
S
Check operation.
S
Lubricate and repair if necessary.
18 *
Sidestand
switch
S
Check operation.
S
Replace if necessary.
19 *
Front fork
S
Check operation and for oil leakage.
S
Correct accordingly.
20 *
Rear shock
absorber
assembly
S
Check operation and shock absorber for oil leakage.
S
Replace shock absorber assembly if necessary.
21 *
Rear
suspension
relay arm and
connecting arm
pivoting points
S
Check operation.
S
Correct if necessary.
22 *
Carburetors
S
Check engine idling speed, synchronization and
starter operation.
S
Adjust if necessary.
23
Engine oil
S
Check oil level and vehicle for oil leakage.
S
Correct if necessary.
S
Change. (Warm engine before draining.)
24
Engine oil
filter cartridge
S
Replace.
25 *
Cooling
system
Cooling
S
Check coolant level and vehicle for coolant leakage.
S
Correct if necessary.
Cooling
system
S
Change coolant.
26 *
Front and rear
brake
switches
S
Check operation.
S
Correct accordingly.
27
Moving parts
and cables
S
Lubricate if necessary.
28 *
Air induction
system
S
Check the air cut valve and reed valve for damage.
S
Replace the entire air induction system if necessary.
29 *
Exhaust
system
S
Check the screw clamp for looseness.
S
Tighten if necessary.
30 *
Lights, signals
and switches
S
Check operation.
S
Correct if necessary.
S
Adjust headlight beam if necessary.
*
Since these items require special tools, data and technical skills, have a Yamaha dealer perform the service.
D
The annual checks must be performed once a year unless a 10,000 km or 20,000 km maintenance
was performed in the same year.
D
The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
D
Hydraulic brake service
S
Regularly check and, if necessary, correct the brake fluid level.
S
Every two years replace the internal components of the brake master cylinder and caliper, and
change the brake fluid.
S
Replace the brake hoses every four years and if cracked or damaged.
Summary of Contents for YZF-R1 2000
