Yamaha YZF-R1 1998, Service Manual, Page: 349 / 418

8 - 3
– +
ELEC
COMBINATION METER
Coolant
temperature
Display Conditions What to do
0 ˚C ~ 40 ˚C
Symbol is on and
“LO” is displayed.
Go ahead with riding.
41 ˚C ~ 117 ˚C
Symbol is on and
temperature is dis-
played.
Go ahead with riding.
118 ˚C ~ 140 ˚C
Symbol and tem-
perature flashes
and indicator light
comes on.
Stop the motorcycle
and allow it to idle until
the coolant temperature
goes down.
If the temperature does
not go down, stop the
engine. Refer to “OVER-
HEATING” in chapter 9.
141 ˚C ~
Symbol flashes,
“HI” is displayed
and flashes, and
the indicator light
comes on.
Stop the engine and
allow it to cool. Refer to
“OVERHEATING” in
chapter 9.
This combination meter is equipped with
the following.
• A speedometer
• An odometer
• Two trip odometers
• A fuel reserve tripmeter
• A clock
For GB and USA models only:
To change the speedometer display from
kilometers to miles, press the “SELECT”
button for at least two seconds.
Odometer and trip meters
Use the trip meters to estimate how far you
can ride on a tank of fuel.
Use the fuel reserve trip meter to see the
distance traveled from when the fuel level
dropped to the reserve level.
Push the “SELECT” button to change
between the odometer mode “ODO” and
the trip odometer modes “TRIP 1” and
“TRIP 2” in the following order:
“ODO”
→
“TRIP 1”
→
“TRIP 2”
→
“ODO”
1 Speedometer
2 Clock, odometer
3 “SELECT” button
4
“RESET” button
INSTRUMENT FUNCTIONS