CHAS
4-57
EAS00666
REMOVING THE HANDLEBAR
1. Stand the vehicle on a level surface.
WARNING
Securely support the vehicle so that there
is no danger of it falling over.
2. Remove:
• grip
NOTE:
NOTE:
Blow compressed air between the handlebar
and the handlebar grip, and gradually push the
grip off the handlebar.
EAS00668
CHECKING THE HANDLEBAR
1. Check:
• handlebar
Bends / cracks / damage
→
Replace.
WARNING
Do not attempt to straighten a bent handle-
bar as this may dangerously weaken it.
EAS00670
INSTALLING THE HANDLEBAR
1. Stand the vehicle on a level surface.
WARNING
Securely support the vehicle so that there
is no danger of it falling over.
2. Install:
• handlebar
• handlebar upper holder
CAUTION:
• First, tighten the bolts on the front side of
the handlebar holder, and then on the rear
side.
• Turn the handlebar all the way to the left
and right. If there is any contact with the
fuel tank, adjust the handlebar position.
27 Nm (2.7 m•kg, 19 ft•lb)
HANDLEBAR
