CHAS
4-4
2. Check:
• tire
• front wheel
Damage / wear
→
Replace.
Refer to “CHECKING THE TIRES” and
“CHECKING THE WHEELS” in chapter 3.
3. Check:
• spokes
Refer to “CHECKING AND TIGHTENING
THE SPOKES” in chapter 3.
NOTE:
NOTE:
After tightening the spokes, measure the front
wheel runout.
4. Measure:
• front wheel radial runout
• front wheel lateral runout
Over the specified limits
→
Replace.
5. Check:
• collars
Damage / wear
→
Replace.
6. Check:
• wheel bearings
Front wheel turns roughly or is loose
→
Replace the wheel bearings.
• oil seals
Damage / wear
→
Replace.
7. Replace:
• wheel bearings
• oil seals
a. Clean the outside of the front wheel hub.
b. Remove the oil seals
with a flat-head
screwdriver.
NOTE:
NOTE:
To prevent damaging the wheel, place a rag
between the screwdriver and the wheel sur-
face.
Front wheel radial runout limit
2.0 mm (0.08 in)
Front wheel lateral runout limit
2.0 mm (0.08 in)
FRONT WHEEL AND BRAKE DISC
