Yamaha YZ 2023 Series, Owner'S Service Manual

Page: 153 / 378

HANDLEBAR
4-39
12.Install:
• Throttle cable housing “1”
•
Screw (throttle cable housing) “2”
WARNING
EWA19310
After tightening the throttle cable housing
screws, check that the throttle grip “3”
moves smoothly. If it does not, retighten the
screws for adjustment.
13.Install:
•
Rubber cover “1”
• Cover (throttle cable housing) “2”
14.Install:
• Start switch “1”
•
Front brake master cylinder assembly “2”
• Front brake master cylinder holder “3”
•
Front brake master cylinder holder bolt “4”
• Clamp “5”
TIP
•
Install the brake master cylinder holder with the
“UP” mark facing up.
•
Install in order for the top of the front brake
master cylinder assembly to be level.
•
First, tighten the upper bolt, then the lower bolt.
15.Adjust:
• Throttle grip free play
Refer to “CHECKING THE THROTTLE
GRIP” on page 3-11.
Screw (throttle cable housing)
3.8 N·m (0.38 kgf·m, 2.8 lb·ft)
T
R
.
.
Front brake master cylinder hold-
er bolt
9 N·m (0.9 kgf·m, 6.6 lb·ft)
T
R
.
.
2
5
1
4
3
4