Yamaha YP250 5GM2-AE1 2000, Service Manual

Page: 44 / 105

34
ENGINE OIL REPLACEMENT
INSP
ADJ
20 Nm (2.0 m kg)
NOTE:
ENGINE
ENGINE OIL REPLACEMENT
1. Start the engine and let it warm up for several
minutes.
2. Turn off the engine and place an oil pan un-
der the engine.
3. Remove:
Drain plug 1
Gasket
Drain the crankcase of its oil.
4. Install:
Gasket New
Drain plug
1
5. Fill:
Crankcase
Oil quantity:
1.4 L
6. Check:
Engine oil level
Refer to “ENGINE OIL LEVEL INSPEC-
TION” section.
7. Reset:
Engine oil indicator circuit
Resetting steps:
Turn the main switch to on.
Push and hold in the reset button for 2 to 5 se-
conds.
Release the reset button
1
and the oil indica-
tor light will go off.
If the oil is changed before the oil indicator light
comes on (i.e. before the 3,000 km oil change
interval is reached), be sure to reset the oil indi-
cator light after changing the oil, so that it will
come on at the correct time to indicate the next
3,000 km oil replacement.
To reset the oil indicator light before it comes on:
Release the reset button and the oil indicator
light will come on for 1.4 seconds.