![background image](http://html.mh-extra.com/html/yamaha/yfm400fwa-2000-5gh3-ae1/yfm400fwa-2000-5gh3-ae1_assembly-manual_898095012.webp)
–5–
8. Handlebar switch/
Commutateur sur guidon
9. Handlebar band (left)/
Collier de guidon (gauche)
10. Handlebar band (right)/
Collier de guidon (droit)
A: Serrer les vis progressivement et
maintenir un intervalle égal de
chaque côté du commutateur sur
guidon.
AVERTISSEMENT
Pour la sécurité, il est essentiel que
les câbles et fils soient posés
correctement. Voir le “CHEMIN-
EMENT DES CABLES ET
FILS”.
1
2
Handlebar switch
Panhead screw
1
2
*
V
d = 5 (0.20),
R
= 30 (1.17)
A: Tighten the screws in stages
and maintain an equal gap on
each side of the handlebar
switch.
WARNING
Proper cable routing is essential to
assure safe machine operation.
Refer to “CABLE ROUTING”.
1
Band
2
V
A: Clamp the handlebar switch
lead (left) and brake light switch
lead.
NOTE:
Refer to “CABLE ROUTING”.
A: Brider le fil de commutateur sur
guidon (gauche) et le fil du
contacteur de feu stop.
N.B.:
Voir le “CHEMINEMENT DES
CABLES ET FILS”.
1
Band
2
V
A: Clamp the handlebar switch
lead (right).
NOTE:
Refer to “CABLE ROUTING”.
A: Brider le fil de commutateur sur
guidon (droite).
N.B.:
Voir le “CHEMINEMENT DES
CABLES ET FILS”.
1
A