Yamaha XVZ13TF 1999, Service Manual

Page: 14 / 501

1-3
FEATURES
GEN
INFO
SET
CRUISE
SET
RES
ON
(After1.4sec)
SET
RES
ON
SET
RES
ON
Flash
Out of range
Out of range
Mannual
acceleration cancel
Rear brake
Clutch
SET Front brake
Resume
Cruise SW
ON
Operation chart
Opera-
tion
Speed
Indica-
tor
Cruise control function
1) The cruise control can only be activated when riding in 4th, 5th gear and traveling between the
speed of 50 and 130 km / h.
2) To operate the system, the “CRUISE” switch should be turned “ON”.
3) When push the cruise control switch to “SET”, the cruise control system will be set the set speed.
4) By pushing (in shorter than 0.5 seconds), the control switch in the direction of either “ACC” or “DEC”,
the set speed can be changed in increments or decrements of approximately 1.6 km / h.
5) If the control switch is held in the “ACC” or “DEC” position (longer than 0.5 seconds), the speed can
be successively increased or decreased slowly.
6) The cruise control will be deactivated if the front or rear brake is applied or if the clutch is disengaged
or if the “CANCEL” switch is pushed.
7) After canceling, the speed is returned to the one set before the cancellation by pushing the control
switch once in the “RES” direction.
8) Auto cruise function is canceled;
a. In case of current speed drops 8 km / h less than the originally set speed.
b. In case of gear position is moved to gears other than of 4th, 5th.
c. In case of systems fines any faulty signal in the following systems.
Control unit
Actuator cable
Logical error in cut off signal
Error signal in speed sensor signal
Error signal in engine revolution
Cruise control switch lead (“SET” / “RES”)
9) When main switch is cut off once, “resume” is canceled.