Periodic maintenance and adjustment
7-14
1
2
3
4
5
6
7
8
9
10
11
12
TIP
Skip steps 4–6 if the oil filter element is
not being replaced.
4. Remove the oil filter element cover
by removing the bolts.
5. Remove and replace the oil filter
element and O-rings.
TIP
Make sure that the O-rings are properly
seated.
6. Install the oil filter element cover by
installing the bolts, and then tight-
en to the specified torque.
7. Install the engine oil drain bolt with
a new gasket, and then tighten the
bolt to the specified torque.
8. Pour the specified amount of the
recommended oil into the crank-
1. Engine oil filler bolt
1. Engine oil drain bolt
2. Gasket
1
2
1
1. Oil filter element cover bolt
2. Oil filter element cover
2
1
1
1. O-ring
2. Oil filter element
Tightening torque:
Oil filter element cover bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
Tightening torque:
Engine oil drain bolt:
20 N·m (2.0 kgf·m, 15 lb·ft)
2
1
B1U-9-75-E0.book 14 ページ ２０２３年４月２０日 木曜日 午後１時５３分
