7
ID
M
C
1446
00300.
fm
GENERAL INFORMATION
GEN
INFO
SPECIAL COMPONENTS
The special components listed below are required for a complete and accurate tuning and assembly of the
motorcycle. The use of proper special instruments prevents damages caused by improper instruments or made-
up techniques.
When ordering a special component, please refer to the list below to avoid any mistake.
Component N.
Description
Picture
90890-01312
Fuel Indicator
The fuel indicator is used to measure the fuel level in the
carburettor float chamber.
90890-06760
Rev Counter
The rev counter is used to measure the engine RPM.
90890-04086/09 All-purpose Clutch Support
This support is used to lock the clutch when assembling
or disassembling the clutch locking nut.
90890-01701
Pulley Lock
The pulley lock is used to lock the secondary pulley.
90890-01862
Flywheel Puller
This is used to pull out the flywheel.
90890-01304
Pin Puller
The pin puller is used to pull out the piston pin.
90890-01135
Tool for Drive Shaft Remover
This tool is used to remove the drive shaft or to separate
the crankcase.
Summary of Contents for XT 125R 2005
