Yamaha XT 125R 2005, Service Information

Page: 8 / 32

8
ID
M
C
1446
00300.
fm
GENERAL INFORMATION
GEN
INFO
(*) Indications from Yamaha are required about the compatibility of the components above. If they are not compatible, ID codes and drawings
of new components are required. Otherwise, Yamaha should state which components are to be excluded from this Manual.
90890-01274 (1)
90890-01275 (2)
90890-01278 (3)
Tool for Drive Shaft Installation
Drive Shaft Pin
Adaptor (M12)
(*) 90890-01326 T-tool
The T-tool is used to hold the shock absorber rod when it
is removed or installed.
(*) 90890-01367
(*) 90890-01381
Fork Clamp
Fork Clamp Fitting
The fork clamp fitting is used to install the fork cross.
(*) 90890-01403 Nut Ring Wrench
This wrench is used to loosen and tighten the nut ring of
the handlebar.
90890-03112 Pocket Tester
The pocket tester is required to check the electrical
system.
Component N. Description Picture