Yamaha XMax YP400RXMAx YP400RA Owner'S Manual Download

Page: 79 / 92

PERIODIC MAINTENANCE AND ADJUSTMENT

6-36

EAU42706

Trou

leshootin

charts

Startin

pro

lems or poor en

ine performance

Check the fuel level in
the fuel tank.

1. Fuel

There is enough fuel.

There is no fuel.

Check the battery.

Supply fuel.

The engine does not start.
Check the battery.

Operate the electric starter.

4. Compression

There is compression.

There is no compression.

The engine does not start.
Have a Yamaha dealer check the vehicle.

Have a Yamaha dealer check the vehicle.

Remove the spark plug
and check the electrodes.

3. Ignition

Wipe off with a dry cloth and correct the
spark plug gap, or replace the spark plug.

Have a Yamaha dealer check the vehicle.

The engine does not start.
Check the compression.

Operate the electric starter.

2. Battery

The engine turns over
quickly.

The engine turns over
slowly.

The battery is good.

Dry

Wet

Operate the electric starter.

Check the battery lead connections,
and have a Yamaha dealer charge
the battery if necessary.

The engine does not start.
Check the ignition.

U1SDE1E0.book Page 36 Monday, September 23, 2013 3:55 PM

Summary of Contents for XMax YP400RXMAx YP400RA





























































































Search results

Summary of Contents for XMax YP400RXMAx YP400RA

Reviews:

Related manuals for XMax YP400RXMAx YP400RA

Brands by name

Popular brands

Yamaha XMax YP400RXMAx YP400RA, Owner'S Manual

Search results

Summary of Contents for XMax YP400RXMAx YP400RA

Reviews:

Related manuals for XMax YP400RXMAx YP400RA

Brands by name

Popular brands