Yamaha XMax YP400RXMAx YP400RA Owner'S Manual Download Page 73

Page: 73 / 92

PERIODIC MAINTENANCE AND ADJUSTMENT

6-30

urns. Avoi

any contact with

skin, eyes or clothin

al-

ways shiel

your eyes when

workin

near

atteries. In case

of contact, a

minister the fol-

lowin

FIRST AID.

• EXTERNAL: Flush with plenty

of water.

• INTERNAL: Drink lar

e quan-

tities of water or milk an

im-

iately call a physician.

• EYES: Flush with water for 15

minutes an

seek prompt

ical attention.



Batteries pro

uce explosive hy-

as. Therefore, keep

sparks, flames, ci

arettes, etc.,

away from the

attery an

pro-

e sufficient ventilation when

char

it in an enclose

space.



KEEP THIS AND ALL BATTER-
IES OUT OF THE REACH OF
CHILDREN.

To char

e the

attery

Have a Yamaha dealer charge the bat-
tery as soon as possible if it seems to
have discharged. Keep in mind that the

battery tends to discharge more quick-
ly if the vehicle is equipped with op-
tional electrical accessories.

NOTICE

ECA16522

To char

e a VRLA (Valve Re

ulate

Lea

Aci

)

attery, a special (con-

stant-volta

attery char

er is re-

quire

. Usin

a conventional

attery

char

er will

ama

e the

attery.

To store the

attery

1. If the model will not be used for

more than one month, remove the
battery, fully charge it, and then
place it in a cool, dry place.

NOTICE:

When removin

the

attery,

e sure the key is

turne

to “OFF”, then

iscon-

nect the ne

ative lea

efore

isconnectin

the positive lea

[ECA16303]

2. If the battery will be stored for

more than two months, check it at
least once a month and fully char-
ge it if necessary.

3. Fully charge the battery before

installation.

NOTICE:

When in-

stallin

the

attery,

e sure the

key is turne

to “OFF”, then

connect the positive lea

efore

connectin

the ne

ative lea

[ECA16841]

NOTICE

ECA16531

Always keep the

attery char

Storin

ischar

attery can

cause permanent

attery

ama

U1SDE1E0.book Page 30 Monday, September 23, 2013 3:55 PM

Summary of Contents for XMax YP400RXMAx YP400RA





























































































Search results

Summary of Contents for XMax YP400RXMAx YP400RA

Reviews:

Related manuals for XMax YP400RXMAx YP400RA

Brands by name

Popular brands

Yamaha XMax YP400RXMAx YP400RA, Owner'S Manual

Search results

Summary of Contents for XMax YP400RXMAx YP400RA

Reviews:

Related manuals for XMax YP400RXMAx YP400RA

Brands by name

Popular brands