Yamaha XMax YP400RXMAx YP400RA Owner'S Manual Download Page 23 | Manualshive

Page: 23 / 92

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-7

3



an oil change indicator



a V-belt replacement indicator

TIP



Be sure to turn the key to “ON” be-
fore using the “SELECT” and “RE-
SET” buttons.



When the key is turned to “ON”, all
of the display segments of the
multi-function display will appear
one after the other and then disap-
pear, in order to test the electrical
circuit.



For the UK, the distance traveled
is displayed in miles and the tem-
perature reading is displayed in
°C.



For other countries, the distance
traveled is displayed in kilometers
and the temperature reading is
displayed in °C.

O

d

ometer an

d

tripmeter mo

d

es

Pushing the “SELECT” button switch-
es the display between the odometer
mode “Odo” and the tripmeter modes
“Trip” in the following order:
Odo

→

Trip 1

→

Trip 2

→

Odo

When approximately 2.0 L (0.53 US
gal, 0.44 Imp.gal) of fuel remains in the
fuel tank, the bottom segment of the
fuel meter will start flashing, and the
display will automatically change to the
fuel reserve tripmeter mode “Trip F”
and start counting the distance trav-
eled from that point. In that case, push-
ing the “SELECT” button switches the
display between the various tripmeter
and odometer modes in the following
order:
Trip F

→

Trip 1

→

Trip 2

→

Odo

→

Trip

F

To reset a tripmeter, select it by push-
ing the “SELECT” button until “Trip” or
“Trip F” , push the “RESET” button for
at least one second. If you do not reset

the fuel reserve tripmeter manually, it
will reset itself automatically and the
display will return to the prior mode af-
ter refueling and traveling 5 km (3 mi).

TIP

The display cannot be changed back
to “Trip F” after pushing the “RESET”
button.

Fuel meter

With the key in the “ON” position, the
fuel meter indicates the amount of fuel
in the fuel tank. The display segments
of the fuel meter disappear towards
“E” (Empty) as the fuel level decreases.
When the fuel level reaches the bottom
segment near “E”, the bottom segment
will flash. Refuel as soon as possible.

Coolant temperature meter

With the key in the “ON” position, the
coolant temperature meter indicates
the temperature of the coolant. The
coolant temperature varies with
changes in the weather and engine
load. If the top segment and coolant
temperature “C” “H” indicator flash,
stop the vehicle and let the engine

1. Fuel reserve tripmeter

ZAUM1010

1/2

1/2

CLOCK

OUT TEMP

°C

TRIP

1

1

U1SDE1E0.book Page 7 Monday, September 23, 2013 3:55 PM

«
...
21
22
23
24
25
...
»

Summary of Contents for XMax YP400RXMAx YP400RA





























































































Reviews:

No comments

Related manuals for XMax YP400RXMAx YP400RA

Brand: iENYRID Pages: 3

RipStik Electric

Brand: Razor Pages: 16

Allstate Cruisaire 1964

Brand: PIAGGIO Pages: 40

Brand: PIAGGIO Pages: 76

Brand: NASA Pages: 68

Brand: Youin Pages: 76

Brand: NAVEE Pages: 44

Brand: CareCo Pages: 32

Brand: ICONE Pages: 42

Brand: Roma Medical Pages: 20

Brand: gio Pages: 14

Brand: Gio Electric Pages: 20

Brand: Gio Electric Pages: 22

Brand: Monzana Pages: 12

Brand: Shoprider Pages: 20

Brand: E-Slide Pages: 53

Brand: Schildkröt Pages: 35

Brand: Schildkröt Pages: 108

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands