Yamaha XMax YP400RXMAx YP400RA, Owner'S Manual

Page: 20 / 92

INSTRUMENT AND CONTROL FUNCTIONS
3-4
3
EAU11081
Hi g h b eam in d icator li g ht “ ”
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU43024
En g ine trou b le warnin g li g ht “ ”
This warning light comes on if an elec-
trical circuit monitoring the engine is
not working correctly. If this occurs,
have a Yamaha dealer check the self-
diagnosis system.
The electrical circuit of the warning
light can be checked by turning the key
to “ON”. The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come on
initially when the key is turned to “ON”,
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
TIP
This warning light will come on when
the key is turned to “ON” and the start
switch is pushed, but this does not in-
dicate a malfunction.
EAUM3381
ABS warnin g li g ht “ ” (for ABS
mo d els)
In normal operation, the ABS warning
light comes on when the key is turned
to “ON”, and goes off after traveling at
a speed of 10 km/h (6 mi/h) or higher.
If the ABS warning light:

does not come on when the key is
turned to “ON”

comes on or flashes while riding

does not go off after traveling at a
speed of 10 km/h (6 mi/h) or high-
er
The ABS may not work correctly. If any
of the above occurs, have a Yamaha
dealer check the system as soon as
possible. (See page 3-12 for an expla-
nation of the ABS.)
WARNING
EWA16041
If the ABS warnin g li g ht d oes not g o
off after travelin g at a spee d of 10
km/h (6 mi/h) or hi g her, or if the
warnin g li g ht comes on or flashes
while ri d in g , the b rake system re-
verts to conventional b rakin g . If ei-
ther of the a b ove occurs, or if the
warnin g li g ht d oes not come on at
all, use extra caution to avoi d possi-
b le wheel lock d urin g emer g ency
b rakin g . Have a Yamaha d ealer
check the b rake system an d electri-
cal circuits as soon as possi b le.
TIP
The ABS warning light may come on
while accelerating the engine with the
scooter on its centerstand, but this
does not indicate a malfunction.
EAU38625
Immo b ilizer system in d icator li g ht
The electrical circuit of the indicator
light can be checked by turning the key
to “ON”. The indicator light should
come on for a few seconds, and then
go off.
If the indicator light does not come on
initially when the key is turned to “ON”,
or if the indicator light remains on, have
a Yamaha dealer check the electrical
circuit.
When the key is turned to “OFF” and
30 seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
ABS
U1SDE1E0.book Page 4 Monday, September 23, 2013 3:55 PM