manualshive.com logo in svg

Yamaha XMAX 250 YP250R, Owner'S Manual, Page: 6 / 68

Share
Download
Yamaha XMAX 250 YP250R Owner'S Manual Download Page 6

SAFETY INFORMATION

.....................1-1

DESCRIPTION

.....................................2-1

Left view ...........................................2-1
Right view .........................................2-2
Controls and instruments .................2-3

INSTRUMENT AND CONTROL
FUNCTIONS

........................................3-1

Immobilizer system...........................3-1
Main switch/steering lock.................3-1
Indicators, indicator lights and 
warning light .....................................3-2
Speedometer ....................................3-3
Fuel gauge ........................................3-3
Coolant temperature gauge..............3-4
Multi-function display .......................3-4
Anti-theft alarm (optional) .................3-7
Handlebar switches ..........................3-7
Front brake lever...............................3-8
Rear brake lever................................3-8
Fuel tank cap ....................................3-8
Fuel ...................................................3-9
Catalytic converter..........................3-10
Seat.................................................3-10
Front storage compartment............3-11
Storage compartment.....................3-11
Adjusting the shock absorber
assemblies ......................................3-11
Sidestand........................................3-12

PRE-OPERATION  CHECKS

..............4-1

Pre-operation check list....................4-2

OPERATION AND IMPORTANT RIDING
POINTS

................................................5-1

Starting a cold engine ......................5-1
Starting off ........................................5-1
Acceleration and deceleration ..........5-2
Braking..............................................5-2
Tips for reducing fuel consumption..5-2
Engine break-in.................................5-3
Parking..............................................5-3

PERIODIC MAINTENANCE AND
MINOR REPAIR

...................................6-1

Owner’s tool kit.................................6-1
Periodic maintenance and lubrication
chart..................................................6-2
Removing and installing cowlings and
panels ...............................................6-5
Checking the spark plug ..................6-5
Engine oil ..........................................6-7
Final transmission oil ........................6-8
Coolant .............................................6-9
Air filter V-Belt case air filter 
elements .........................................6-10
Adjusting the carburetor .................6-11
Adjusting the throttle cable free play ..6-12
Valve clearance...............................6-12
Tires ................................................6-12
Cast wheels ....................................6-14
Front and rear brake lever free play....6-14
Checking the front and rear brake ........
pads ................................................6-14
Checking the brake fluid level ........6-15

Changing the brake fluid ................6-16
Checking and lubricating the throttle
grip cable ........................................6-16
Lubricating the front and rear brake
levers ..............................................6-16
Checking and lubricating the
centerstand and sidestand .............6-16
Checking the front fork...................6-17
Cheking the steering.......................6-17
Checking the wheel bearings .........6-18
Battery ............................................6-18
Replacing the fuses ........................6-19
Replacing a headlight bulb.............6-20
Replacing a front turn signal light .........
bulb .................................................6-21
Replacing the tail/brake light bulb or a
rear turn signal light bulb................6-21
Replacing the license plate light bulb ...6-22
Replacing the auxiliary light bulb ...6-22
Troubleshooting ..............................6-23
Troubleshooting charts ...................6-24

SCOOTER CARE AND STORAGE

.....7-1

Care ..................................................7-1
Storage compartment.......................7-3

SPECIFICATIONS

...............................8-1

CONSUMER INFORMATION

.............9-1

Key identification number.................9-1
Vehicle identification number............9-1
Model label .......................................9-1

TABLE OF CONTENTS

1C0-F8199-E0.qxd  13/04/2005 16:58  Página 4

Summary of Contents for XMAX 250 YP250R





































































Reviews:

No comments