manualshive.com logo in svg

Yamaha XMAX 250 YP250R, Owner'S Manual, Page: 38 / 68

Share
Download
Yamaha XMAX 250 YP250R Owner'S Manual Download Page 38

EAU18712

Removing and installing
cowlings and panels

The cowlings and panels shown need
to be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each
time a cowling or panel needs to be
removed and installed.

EAU18790

Cowling A

To remove the cowling

1. Screws

Cowling B

Screws

Remove the screws, and then take
the cowling off.
To install the cowling
Place the cowling in the original posi-
tion, and then install the screws.

EAUM1250

Panel A

To remove the panel

1. Open the storage compartment.

(See page 3-11.)

Screws

2. Remove the screw, and then take

the panel off.

To install the panel

1. Place the panel in the original

position, and then install the
screw.

2. Close the storage compartment.

EAUS1280

Checking the spark plug

The spark plug is an important engine
component, which is easy to check.
Since heat and deposits will cause any
spark plug to slowly erode, the spark
plug should be removed and checked
in accordance with the periodic main-
tenance and lubrication chart. In addi-
tion, the condition of the spark plug
can reveal the condition of the engine.

To remove the spark plug

1. Storage compartment
2. Screws

1. Open the seat. (See page 3-10.)
2. Remove the storage compart-

ment under the seat by removing
the bolts.

1

2

1

1

6

PERIODIC MAINTENANCE AND MINOR REPAIR

6-5

1C0-F8199-E0.qxd  13/04/2005 16:58  Página 38

Summary of Contents for XMAX 250 YP250R





































































Reviews:

No comments