background image

EAU16841

Engine break-in

There is never a more important
period in the life of your engine than
the period between 0 and 1600 km
(1000 mi). For this reason, you should
read the following material carefully.
Since the engine is brand new, do not
put an excessive load on it for the first
1600 km (1000 mi). The various parts
in the engine wear and polish them-
selves to the correct operating clea-
rances. During this period, prolonged
full-throttle operation or any condition
that might result in engine overhea-
ting must be avoided.

EAUM2010

0 ~ 1000 km (0 ~ 600 mi)

Avoid prolonged operation above 1/3
throttle.

1000 ~ 1600 km (600 ~ 1000 mi)

Avoid prolonged operation above 1/2
throttle.

ECA11660

CAUTION

After 1000 km (600 mi) of operation,
be sure to replace the engine oil
and final transmission oil.

1600 km (1000 mi) and beyond

The vehicle can now be operated nor-
mally.

ECA10270

CAUTION

If any engine trouble should occur
during the engine break-in period,
immediately have a Yamaha dealer
check the vehicle.

EAU17212

Parking

When parking, stop the engine, and
then remove the key from the main
switch.

EWA10310

s

s

WARNING

Since the engine and exhaust
system can become very hot,
park in a place where pedes-
trians or children are not likely
to touch them.

Do not park on a slope or on
soft ground, otherwise the
vehicle may overturn.

ECA10380

CAUTION

Never park in an area where there
are fire hazards such as grass or
other flammable materials.

5

OPERATION AND IMPORTANT RIDING POINTS

5-3

1C0-F8199-E0.qxd  13/04/2005 16:58  Página 5-3

Summary of Contents for XMAX 250 YP250R





































































Reviews: