Yamaha XMAX 250 YP250R Owner'S Manual Download Page 47 | Manualshive

Page: 47 / 68

Yamaha XMAX 250 YP250R Owner'S Manual Download Page 47

Tire information

This motorcycle is equipped with
tubeless tires.

EWA10470

s

s

WARNING

●

Have a Yamaha dealer replace
excessively worn tires. Besides
being illegal, operating the
vehicle with excessively worn
tires decreases riding stability
and can lead to loss of control.

●

The replacement of all wheel
and brake related parts, inclu-
ding the tires, should be left to
a Yamaha dealer, who has the
necessary professional know-
ledge and experience.

EAU21960

Cast wheels

To maximize the performance, durabi-
lity, and safe operation of your
motorcycle, note the following points
regarding the specified wheels.

●

The wheel rims should be chec-
ked for cracks, bends or warpage
before each ride. If any damage
is found, have a Yamaha dealer
replace the wheel. Do not
attempt even the smallest repair
to the wheel. A deformed or crac-
ked wheel must be replaced.

●

The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced.
An unbalanced wheel can result
in poor performance, adverse
handling characteristics, and a
shortened tire life.

●

Ride at moderate speeds after
changing a tire since the tire sur-
face must first be “broken in” for
it to develop its optimal characte-
ristics.

EAU33451

Front and rear brake lever
free play

There should be no free play at the
brake lever ends. If there is free play,
have a Yamaha dealer inspect the
brake system.

EAU22390

Checking the front and rear
brake pads

The front and rear brake pads must
be checked for wear at the intervals
specified in the periodic maintenance
and lubrication chart.

EAU22400

Front brake pads

1

Front tire:

Size:

120/70-15 56S

Manufacturer/model:

Michelin Gold Standard

Rear tire:

Size:

140/70-14 68S

Manufacturer/model:

Michelin Gold Standard

6

PERIODIC MAINTENANCE AND MINOR REPAIR

6-14

1C0-F8199-E0.qxd 13/04/2005 16:58 Página 47

«
...
45
46
47
48
49
...
»

Summary of Contents for XMAX 250 YP250R





































































Reviews:

No comments