manualshive.com logo in svg

Yamaha XMAX 250 YP250R, Owner'S Manual, Page: 25 / 68

Share
Download
Yamaha XMAX 250 YP250R Owner'S Manual Download Page 25

EAU14540

Storage compartment

1. Lock

To open the storage compartment

Insert the key into the lock, turn it
clockwise, and then pull on it to open
the storage compartment lid.

1.Storage compartment

To close the storage compartment

Push the storage compartment lid
into the original position, and then
remove the key.

EWA10960

s

s

WARNING

●

Do not exceed the load limit of
1kg (2,205 lb) for the storage
compartment.

●

Do not exceed the maximum
load of 235kg (518,17lb) for the
vehicle.

EAU14451

Storage compartment

1.Storage compartment

The storage compartment is located
under the seat. (See page 3-10.)

EWA10961

s

s

WARNING

●

Do not exceed the load limit of
5kg (11,02 lb) for the storage
compartment.

●

Do not exceed the maximum
load of 235kg (518,17lb) for the
vehicle.

When storing the owner’s manual or
other documents in the storage com-
partment, be sure to wrap them in a
plastic bag so that they will not get
wet. When washing the vehicle, be
careful not to let any water enter the
storage compartment.

EAU14880

Adjusting the shock
absorber assemblies

Each shock absorber assembly is
equipped with a spring preload adjus-
ting ring.

ECA10100

CAUTION

Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.

1

1

1

3

INSTRUMENT AND CONTROL FUNCTIONS

3-11

1C0-F8199-E0.qxd  13/04/2005 16:58  Página 3-11

Summary of Contents for XMAX 250 YP250R





































































Reviews:

No comments