Instrument an
d
control functions
5-5
5
The tripmeter display is equipped with
the following:
odometer
tripmeter
time tripmeter
fuel reserve tripmeter
oil change tripmeter
V-belt replacement tripmeter
Use the “TRIP” switch to change the
display between the odometer “Odo”,
tripmeter “Trip”, time tripmeter “Trip
Time”, oil change tripmeter “Oil Trip”,
and V-belt replacement tripmeter “V-
Belt Trip” in the following order:
Odo
→
Trip
→
Trip Time
→
Oil Trip
→
V-Belt Trip
→
Odo
O
d
ometer “O
d
o” an
d
tripmeter
“Trip”
The odometer shows the total distance
traveled by the vehicle.
The tripmeter shows the distance trav-
eled since it was last reset.
To reset the tripmeter, select it by us-
ing the “TRIP” switch, and then hold
the “TRIP” switch for three seconds.
TIP
The odometer will lock at 999999.
The tripmeter will reset and con-
tinue counting after 9999.9 is
reached.
Time tripmeter “Time”
The time tripmeter displays the time
that has elapsed while the main switch
was in the “ON” position since it was
last reset.
The maximum time that can be shown
is 99:59.
TIP
To reset the time tripmeter, select it by
using the “TRIP” switch, and then hold
the “TRIP” switch for three seconds.
Fuel reserve tripmeter “F Trip”
When approximately 2.4 L (0.63 US
gal, 0.53 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter will start flashing. The display
will automatically change to the fuel re-
serve tripmeter “F Trip” and start
counting the distance traveled from
that point. In this case, use the “TRIP”
switch to cycle the display in the fol-
lowing order:
1. Time tripmeter
1
1. Fuel reserve tripmeter
1
UB5X10E0.book Page 5 Thursday, May 27, 2021 8:55 AM
