Yamaha XMAX 125i Page 73 Owner'S Manual Download

Page: 73 / 92

EAUM2201

Replacing the license plate
light bulb

1. Remove the socket (together

with the bulb) by pulling it out.

1. License plate light bulb socket

2. Remove the burnt out bulb by

pulling it out.

1. License plate light bulb

3. Insert a new bulb into the socket.
4. Install the socket (together with

the bulb) by pushing it in.

EAUM2212

Replacing an auxiliary light
bulb

This model is equipped with two auxi-
liary lights. If an auxiliary light bulb
burns out, replace it as follows.

1. Remove cowling B. (See page

6-6).

2. Remove the socket (together

with the bulb) by pulling it out.

1. Auxiliary light bulb socket

3. Remove the burnt out bulb by

pulling it out.

ZAUM0681

PERIODIC MAINTENANCE AND ADJUSTMENT

6-31

1B9-F8199-E3.QXD 21/10/08 13:43 Página 73

Summary of Contents for XMAX 125i





























































































Search results

Summary of Contents for XMAX 125i

Reviews:

Related manuals for XMAX 125i

Brands by name

Popular brands

Yamaha XMAX 125i, Owner'S Manual

Search results

Summary of Contents for XMAX 125i

Reviews:

Related manuals for XMAX 125i

Brands by name

Popular brands