Yamaha XMAX 125i Owner'S Manual Download Page 26

Page: 26 / 92

EAU13175

Fuel tank cap

To remove the fuel tank cap

1. Open the lid by pulling the lever

up.

1. Fuel tank cap lid
2. Lever

2. Insert the key into the lock and

turn it clockwise. The lock will be
released and the fuel tank cap
can be removed.

1. Fuel tank cap

To install the fuel tank cap

1. Align the match marks, insert the

fuel tank cap into the tank ope-
ning, and then push down on the
cap.

1. Match marks

2. Turn the key counterclockwise to

the original position, and then
remove it.

3. Close the lid.

EWA11261

WARNING

Make sure that the fuel tank cap is
properly installed and locked in pla-
ce before riding the scooter. Lea-
king fuel is a fire hazard.

INSTRUMENT AND CONTROL FUNCTIONS

3-11

1B9-F8199-E3.QXD 21/10/08 13:42 Página 26

Summary of Contents for XMAX 125i





























































































Search results

Summary of Contents for XMAX 125i

Reviews:

Related manuals for XMAX 125i

Brands by name

Popular brands

Yamaha XMAX 125i, Owner'S Manual

Search results

Summary of Contents for XMAX 125i

Reviews:

Related manuals for XMAX 125i

Brands by name

Popular brands