Yamaha XMAX 125i Page 18 Owner'S Manual Download

Page: 18 / 92

EAU10681

LOCK

The steering is locked, and all electri-
cal systems are off. The key can be
removed.

To lock the steering

1. Push.
2. Turn.

1. Turn the handlebars all the way to

the left.

2. Push the key in from the “OFF”

position, and then turn it to
“LOCK” while still pushing it.

3. Remove the key.

To unlock the steering

1. Push.
2. Turn.

Push the key in, and then turn it to
“OFF” while still pushing it.

EAU11003

Indicator and warning lights

1. Fuel level warning light “

”

2. High beam indicator light “

”

3. Left turn signal indicator light “

”

4. Immobilizer system indicator light “

”

5. Right turn signal indicator light “

”

6. Engine trouble warning light “

”

EAU11030

Turn signal indicator lights “

”

and “

”

The corresponding indicator light flas-
hes when the turn signal switch is
pushed to the left or right.

EAU11080

High beam indicator light “

”

This indicator light comes on when
the high beam of the headlight is swit-
ched on.

80 100

120

140

160

km/h

FUEL

TEMP

INSTRUMENT AND CONTROL FUNCTIONS

3-3

1B9-F8199-E3.QXD 21/10/08 13:42 Página 18

Summary of Contents for XMAX 125i





























































































Search results

Summary of Contents for XMAX 125i

Reviews:

Related manuals for XMAX 125i

Brands by name

Popular brands

Yamaha XMAX 125i, Owner'S Manual

Search results

Summary of Contents for XMAX 125i

Reviews:

Related manuals for XMAX 125i

Brands by name

Popular brands