Yamaha XMAX 125i Owner'S Manual Download Page 35

Page: 35 / 92

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is turned on.
3. Turn the key on.
4. Keep the front or rear brake applied.
5. Push the start switch.

Does the engine start?

With the engine still off:
6. Move the sidestand up.
7. Keep the front or rear brake applied.
8. Push the start switch.

Does the engine start?

With the engine still running:
9. Move the sidestand down.

Does the engine stall?

The system is OK.

The scooter can be ridden.

This check is most reliable if performed with
a warmed-up engine.

The sidestand switch may be defective.

The scooter should not be ridden

until

checked by a Yamaha dealer.

The brake switch may be defective.

The scooter should not be ridden

until

checked by a Yamaha dealer.

The sidestand switch may be defective.

The scooter should not be ridden

until

checked by a Yamaha dealer.

YES

NOTE:

INSTRUMENT AND CONTROL FUNCTIONS

3-20

1B9-F8199-E3.QXD 21/10/08 13:42 Página 35

Summary of Contents for XMAX 125i





























































































Search results

Summary of Contents for XMAX 125i

Reviews:

Related manuals for XMAX 125i

Brands by name

Popular brands

Yamaha XMAX 125i, Owner'S Manual

Search results

Summary of Contents for XMAX 125i

Reviews:

Related manuals for XMAX 125i

Brands by name

Popular brands