7-7
ELEC
CHECKING THE BULBS AND BULB SOCKETS
NOTE:
CHECKING THE CONDITION OF THE BULB
SOCKETS
The following procedure applies to all of the
bulb sockets.
1. Check:
bulb socket (for continuity)
(with the pocket tester)
No continuity
Replace.
Pocket tester
90890-03112
Check each bulb socket for continuity in the
same manner as described in the bulb section;
however, note the following.
a. Install a good bulb into the bulb socket.
b. Connect the pocket tester probes to the re-
spective leads of the bulb socket.
c. Check the bulb socket for continuity.
If any of the readings indicate no continuity,
replace the bulb socket.
Summary of Contents for XJR1300 (L) '99
