3-8
Drive axle, Motor
Drive
Unit
2. Install the following part:
• Heat-dissipating sheet
1
NOTICE
Thermal protection may be compromised by
an ill-fitting heat-dissipating sheet, so be
sure to replace the heat-dissipating sheet
with a new one when the assembly is disas-
sembled.
TIP
• Put the heat-dissipating sheet to designated
location of controller.
• The heat-dissipating sheet should not be
stretched more than 10% beyond its original
dimensions.
1
New
3. Install the following parts:
• Gear cover
• Driven gear assembly
• One-way outer boss
• Clutch boss assembly
• Plate washer
TIP
When installing the gear cover, align the pro-
jections
a
of the gear cover with the cut out
parts
b
of the motor complete.
ab
ab