1-5
Servicing Precautions (2)
GEN
INFO
Servicing Precautions (2)
Bearing Installation
1. When installing a bearing, the surface with
the manufacturer’s mark and the size code
should face outward.
2. When striking a bearing into the case, apply
a parallel force to the outer race.
3. When striking a bearing onto an axle, apply a
parallel force to the inner race.
Oil Seal Installation
1. To install an oil seal, direct the main lip to
wards the oil chamber (the object of seal ing).
2. Be sure to apply a thin, even coat of grease
to the sealing lip before installing the oil seal.
Main lip
Oil
Sub lip
Spring
Grease
Circlip Installation
1. To install a circlip, direct the chamfered side
of the circlip inward.
2. Install the circlip by aligning its opening with
the center of the spline.
3. Do not expand the circlip more than neces
sary.
Gear
Circlip
Chamfer
Circlip
Axle
