Yamaha WOLVERINE YXE70WPAH Owner'S Manual Download Page 55

Page: 55 / 186

4-17

Adjust the driver seat position as follows.

1. Remove the driver seat cushion. (See the

previous section “Seats”.)

2. Remove the bolts.

3. Move the seat frame to the desired posi-

tion and align the bolt holes in the seat
frame with the bolt holes in the vehicle
frame.

4. Install the bolts, and then tighten the bolts

to the specified torque.

5. Install the cushion.

EBU33471

Seat belts

This vehicle is equipped with three-point seat
belts for the driver and passenger. Always
wear the seat belts properly while riding in the
vehicle. See page 7-5 for more information.

1. Bolt

Tightening torque:

Driver seat bolt:

23 N·m (2.3 kgf·m, 17 lb·ft)

U2MB7BE0.book Page 17 Thursday, March 3, 2016 11:46 AM

Summary of Contents for WOLVERINE YXE70WPAH



























































































































































































Search results

Summary of Contents for WOLVERINE YXE70WPAH

Reviews:

Related manuals for WOLVERINE YXE70WPAH

Brands by name

Popular brands

Yamaha WOLVERINE YXE70WPAH, Owner'S Manual

Search results

Summary of Contents for WOLVERINE YXE70WPAH

Reviews:

Related manuals for WOLVERINE YXE70WPAH

Brands by name

Popular brands