manualshive.com logo in svg

Yamaha WOLVERINE YXE70WPAH, Owner'S Manual

Share
Download
Yamaha WOLVERINE YXE70WPAH Owner'S Manual Download Page 25

1-17

1

YAMAHA

2MB-F4897-00

WARNING

• Load or trailer may affect handling and stability.

• Do not exceed the maximum load ratings for the

cargo bed , trailer tongue, or vehicle.

• When loaded with cargo or towing a trailer:

• Reduce speed and allow more room to stop.

• Turn gradually and slowly.

• Avoid hills and rough terrain.

• Secure cargo so that it will not shift - a loose load

could change handling unexpectedly or be thrown

forward and strike occupants.

• Keep weight in the cargo bed centered side to side and

as low as possible. Top-heavy loads increase the risk of a

rollover.

• Do not tow or pull objects from any point other than

the trailer hitch bracket or winch (if installed).

• Read Owner’s Manual before loading, towing, or pulling

objects.

Improper use of cargo bed or 

cage/frame can result 

in severe injury or 

death from loss of 

control, overturn or 

other accidents.

Maximum Load in Cargo Bed: 300 lbs (136 kg)

Maximum Vehicle Load: 721 lbs (327 kg)

Never carry

passengers

in cargo bed.

1HP-F2259-21

4

5

U2MB7BE0.book  Page 17  Thursday, March 3, 2016  11:46 AM

Summary of Contents for WOLVERINE YXE70WPAH



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands