manualshive.com logo in svg

Yamaha WOLVERINE YFM45FXV, Owner'S Manual, Page: 74 / 186

Share
Download
Yamaha WOLVERINE YFM45FXV Owner'S Manual Download Page 74

7-11

Loading and accessories 

As originally equipped, this ATV is not de-
signed to carry cargo or tow a trailer. If you
choose to add accessories so that you can
carry cargo or tow a trailer, you must use
common sense and good judgment. 
Use extra caution when riding the ATV with
additional loads, such as accessories or car-
go. The ATV’s handling may be adversely af-
fected. Reduce your speed when adding
additional loads. 

MAXIMUM LOADING LIMIT 

●

Vehicle loading limit: 100 kg (220 lb) 

* Total weight of rider, cargo and 

accessories. 

●

Storage compartment: 2.0 kg (4 lb)

WARNING

POTENTIAL HAZARD 
Overloading this ATV or carrying or tow-
ing cargo improperly. 
WHAT CAN HAPPEN 
Could cause changes in vehicle han-
dling which could lead to an accident. 
HOW TO AVOID THE HAZARD 
Never exceed the stated load capacity
for this ATV. 
Cargo should be properly distributed
and securely attached. 
Reduce speed when carrying cargo or
pulling a trailer. Allow greater distance
for braking. 
Always follow the instructions in your
Owner’s Manual for carrying cargo or
pulling a trailer.

U3C210.book  Page 11  Tuesday, June 21, 2005  10:54 AM

Summary of Contents for WOLVERINE YFM45FXV



























































































































































































Reviews:

No comments