manualshive.com logo in svg

Yamaha WOLVERINE YFM45FXV, Owner'S Manual

The Yamaha Wolverine YFM45FXV is a powerful and reliable off-road vehicle designed for adventurous individuals. To ensure you make the most of your ownership experience, a comprehensive Owner's Manual is available for effortless download, free of charge, from manualshive.com. Explore the diverse features, maintenance tips, and safety guidelines provided in the manual to optimize your Yamaha Wolverine experience.

Share
Download
background image

4-11

EBU00093

Fuel cock

The fuel cock supplies fuel from the fuel tank
to the carburetor.
The fuel cock has three positions.
OFF: With the lever in this position fuel will

not flow. Always turn the lever to this
position when the engine is not running.

ON:

With the lever in this position, fuel flows
to the carburetor. Normal riding is done
with the lever in this position.

RES: This indicates reserve. If you run out of

fuel while riding, turn the lever to this
position. THEN FILL THE FUEL TANK
AT THE FIRST OPPORTUNITY. After
refuelling, return the fuel cock lever to
the “ON” position.

1. Arrow mark positioned over “OFF”

1. Arrow mark positioned over “ON”

OFF Position

ON Position

U3C210.book  Page 11  Tuesday, June 21, 2005  10:54 AM

Summary of Contents for WOLVERINE YFM45FXV



























































































































































































Reviews:

No comments

Related manuals for WOLVERINE YFM45FXV

Brands by name

Popular brands

Load more brands