manualshive.com logo in svg

Yamaha WOLVERINE YFM45FXV, Owner'S Manual

The Yamaha Wolverine YFM45FXV is a powerful and reliable off-road vehicle designed for adventurous individuals. To ensure you make the most of your ownership experience, a comprehensive Owner's Manual is available for effortless download, free of charge, from manualshive.com. Explore the diverse features, maintenance tips, and safety guidelines provided in the manual to optimize your Yamaha Wolverine experience.

Share
Download
background image

8-32

NOTE:

_ 

If a torque wrench is not available when you
are installing a spark plug, a good estimate of
the correct torque is 1/4 to 1/2 turn past finger
tight. Have the spark plug tightened to the
specified torque as soon as possible. 

_

4. Install the spark plug cap. 

EBU15140

Air filter element cleaning

NOTE:

_ 

There is a check hose at the bottom of the air
filter case. If dust or water collects in this
hose, empty the hose and clean the air filter
element and air filter case. 

_

1. Air filter case check hose

1. Remove the seat. (See pages 4-13–4-14

for seat removal and installation proce-
dures.)

2. Remove the air filter case cover by un-

hooking the fasteners.

U3C210.book  Page 32  Tuesday, June 21, 2005  10:54 AM

Summary of Contents for WOLVERINE YFM45FXV



























































































































































































Reviews:

No comments

Related manuals for WOLVERINE YFM45FXV

Brands by name

Popular brands

Load more brands