manualshive.com logo in svg

Yamaha WOLVERINE YFM45FXV, Owner'S Manual

The Yamaha Wolverine YFM45FXV is a powerful and reliable off-road vehicle designed for adventurous individuals. To ensure you make the most of your ownership experience, a comprehensive Owner's Manual is available for effortless download, free of charge, from manualshive.com. Explore the diverse features, maintenance tips, and safety guidelines provided in the manual to optimize your Yamaha Wolverine experience.

Share
Download
background image

8-28

1. Coolant reservoir hose

8. After draining the coolant, thoroughly

flush the cooling system with clean tap
water.

9. Replace the coolant drain bolt washer if it

is damaged, install the coolant drain bolt,
and then tighten it to the specified torque.

10. Connect the coolant reservoir hose.
11. Pour the recommended coolant into the

reservoir to the maximum level mark, and
then install the reservoir cap.

12. Pour the recommended coolant into the

radiator until it is full, and then install the
radiator cap.

Tightening torque:

Coolant drain bolt:

10 Nm (1.0 m·kgf, 7.2 ft·lbf)

Recommended antifreeze:

High quality ethylene glycol antifreeze 
containing corrosion inhibitors for 
aluminum engines.

Antifreeze and water mixing ratio:

1:1

Total amount:

1.32 L (1.16 Imp qt, 1.40 US qt)

Coolant reservoir capacity 
(up to the maximum level mark):

0.25 L (0.22 Imp qt, 0.26 US qt)

U3C210.book  Page 28  Tuesday, June 21, 2005  10:54 AM

Summary of Contents for WOLVERINE YFM45FXV



























































































































































































Reviews:

No comments

Related manuals for WOLVERINE YFM45FXV

Brands by name

Popular brands

Load more brands