manualshive.com logo in svg

Yamaha WOLVERINE YFM45FXV, Owner'S Manual

The Yamaha Wolverine YFM45FXV is a powerful and reliable off-road vehicle designed for adventurous individuals. To ensure you make the most of your ownership experience, a comprehensive Owner's Manual is available for effortless download, free of charge, from manualshive.com. Explore the diverse features, maintenance tips, and safety guidelines provided in the manual to optimize your Yamaha Wolverine experience.

Share
Download
background image

5-9

2. The tires should be set to the rec-

ommended pressure:

●

Recommended tire pressure

Front 40 kPa (0.40 kgf/cm

2

, 5.8 psi)

Rear 40 kPa (0.40 kgf/cm

2

, 5.8 psi)

●

Check and adjust tire pressures when
the tires are cold.

●

Tire pressures must be equal on both
sides.

3. Tire pressure below the minimum

specified could cause the tire to
dislodge from the rim under severe
riding conditions. 
The following are minimums:

Front 37 kPa (0.37 kgf/cm

2

, 5.3 psi)

Rear 37 kPa (0.37 kgf/cm

2

, 5.3 psi)

4. Use no more than the following

pressures when seating the tire
beads.

Front 250 kPa (2.5 kgf/cm

2

, 36 psi)

Rear 250 kPa (2.5 kgf/cm

2

, 36 psi)

Higher pressures may cause the
tire to burst. Inflate the tires very
slowly and carefully. Fast inflation
could cause the tire to burst.

U3C210.book  Page 9  Tuesday, June 21, 2005  10:54 AM

Summary of Contents for WOLVERINE YFM45FXV



























































































































































































Reviews:

No comments

Related manuals for WOLVERINE YFM45FXV

Brands by name

Popular brands

Load more brands