Yamaha WOLVERINE R MAX 2021 Page 57 Manual Download

Page: 57 / 190

5-26

EBU36184

Seat belts

Always wear the seat belts properly while rid-
ing in the vehicle. (See page 8-5.)

TIP



If the vehicle is driven without the driver
seat belt fastened, a buzzer will sound.



If the vehicle is driven without the driver
seat belt fastened, engine power will be lim-
ited.

EBU31503

Glove compartment

Store lightweight or frequently used items,
such as your driving gloves or vehicle docu-
ments, in this compartment.

1. Push and open.

Glove compartment load limit: 5.0 kg (11 lb)

UB4M11E0.book Page 26 Tuesday, August 4, 2020 1:04 PM

Summary of Contents for WOLVERINE R MAX 2021































































































































































































Search results

Summary of Contents for WOLVERINE R MAX 2021

Reviews:

Related manuals for WOLVERINE R MAX 2021

Brands by name

Popular brands

Yamaha WOLVERINE R MAX 2021, Manual

Search results

Summary of Contents for WOLVERINE R MAX 2021

Reviews:

Related manuals for WOLVERINE R MAX 2021

Brands by name

Popular brands