background image

EBU31040

INTRODUCTION

EBU38911

Congratulations on your purchase of the Yamaha YXE10WPLM. It represents the result of many
years of Yamaha experience in the production of fine sporting, touring, and pace-setting racing
vehicles. With the purchase of this Yamaha, you can now appreciate the high degree of crafts-
manship and reliability that have made Yamaha a leader in these fields.
This manual will provide you with a good basic understanding of the features and operation of
this vehicle. It also includes basic maintenance and inspection procedures. If you have any ques-
tions regarding the operation or maintenance of your vehicle, please consult a Yamaha dealer.

WARNING

EWB04330

Read this manual carefully before operating this vehicle. Do not attempt to operate this
vehicle until you have attained adequate knowledge of its controls and operating fea-
tures.

Read the Winch Owner’s Manual carefully and completely before operating the winch.
Make sure you understand all instructions.

Regular inspections and careful maintenance, along with good operating techniques,
will help ensure that you safely enjoy the capabilities and reliability of this vehicle.

 

UB4M11E0.book  Page 1  Tuesday, August 4, 2020  1:04 PM

Summary of Contents for WOLVERINE R MAX 2021































































































































































































Reviews: