Yamaha WOLVERINE R MAX 2021 Page 55 Manual Download

Page: 55 / 190

5-24

EBU34993

Adjusting the driver seat position

The driver seat position can be adjusted to
suit the driver’s preference.

WARNING! Nev-

er adjust the seat position while operating
the vehicle, otherwise the seat may sud-
denly change position, which may lead to
an accident.

[EWB03990]

To adjust the driver seat position, pull the
driver seat position adjusting lever upward
and move the seat to the desired position.

TIP

Adjust the driver seat position and make sure
it is locked in place before starting off.

1. Driver seat position adjusting lever
2. Driver seat

UB4M11E0.book Page 24 Tuesday, August 4, 2020 1:04 PM

Summary of Contents for WOLVERINE R MAX 2021































































































































































































Search results

Summary of Contents for WOLVERINE R MAX 2021

Reviews:

Related manuals for WOLVERINE R MAX 2021

Brands by name

Popular brands

Yamaha WOLVERINE R MAX 2021, Manual

Search results

Summary of Contents for WOLVERINE R MAX 2021

Reviews:

Related manuals for WOLVERINE R MAX 2021

Brands by name

Popular brands