Yamaha VL-1, Feature Reference

Page: 123 / 195

119
Feature Reference
●
Edit Mode
3: Equalizer Auxiliary
• An inverse “K”(
˚
) next to a value means that key scaling can be applied to
that parameter. Position the cursor at the appropriate parameter and then press
the
¶
button (“
KSC
”) to go directly to the key scaling page for that param-
eter. You can return to the equalizer auxiliary parameter page by pressing the
]
button.
●
Input Gain
≤
0 … 127.
Adjusts the level of the input signal to the equalizer stage. The higher the value the
higher the input level.
●
HPF Cutoff Freq.
≤
17.0 Hz … 11.2 kHz.
Sets the cutoff frequency of the high-pass filter. Frequency components below the
specified frequency are cut off.
●
LPF Cutoff Freq.
≤
31.1 Hz … 24.0 kHz.
Sets the cutoff frequency of the low-pass filter. Frequency components above the
specified frequency are cut off. The low-pass filter is completely bypassed when set to
“off”.
Element Modifier