Yamaha VL-1, Feature Reference

Page: 153 / 195

149
Feature Reference
●
Edit Mode
5-4: Amplitude & Filter Sustain Level Key Scaling
rate varies smoothly between the breakpoints.
Amplitude & Filter sustain level key scaling produces natural sustain level varia-
tions across the range of the keyboard by allowing different level offset values to be
applied to each of two breakpoints set at appropriate keys.
• The
§
and
¶
buttons (“
Bpag
” and “
Fpag
”) can be used to go directly
backward or forward to the next Amplitude & Filter key scaling page without
having to return to the main parameter page.
●
SusLvl
≤
0 … 127.
The “
SusLvl
” parameter is linked to the main Amplitude & Filter “
Level:
Sustain
” parameter, and has the same effect. This value also determines the main
sustain level on which all key-scaled variations are based (indicated by a dotted line on
the graph).
●
Breakpoint 1 & 2 Key
≤
C-2 … G8.
Allows two separate key scaling breakpoints to be set at any notes between C-2 and
G8. You can position the cursor at the appropriate breakpoint key parameter and use any
of the normal data entry procedures, or use the keyboard. To use the keyboard for break-
point entry, position the cursor at the appropriate breakpoint key parameter, press the
•
button (“
Kbd
”), and then press the key at which you want to set the breakpoint while
“
Kbd
” appears in inverse characters.
No breakpoint can be set to a key lower than the breakpoint to its left.
●
Breakpoint 1 & 2 Offset
≤
-64 … 63.
Set the amount of sustain level offset for each of the breakpoints defined by the
breakpoint key parameters, above. Negative values reduce the sustain level, and positive
values increase the sustain level at the corresponding breakpoint. No matter what offset
value is chosen, the actual sustain level will never exceed its minimum or maximum
absolute value. When different offset values are applied to adjacent breakpoints, the
Element Envelope