87
POWR
TR
INSPECTION
1. Inspect:
• Track
1
• Slide metal
2
Wear/cracks/damage
→
Replace.
1
2
2. Inspect:
• Sprocket wheel
1
Wear/break/damage
→
Replace.
• Front axle
2
Bends/scratches (excessive)/damage
→
Replace.
3. Inspect:
• Bearing
Pitting/damage
→
Replace.
1
2
INSTALLATION
1. Install:
• Sprocket wheels
• Guide wheels
NOTE:
• When pressing the sprocket wheels onto the front
axle, align the lugs on each sprocket wheel.
• Position each sprocket wheel on the axle as
shown in the illustration.
103.5 mm
(4.07 in)
103.5 mm
(4.07 in)
121.5 mm
(4.78 in)
121.5 mm
(4.78 in)
42 mm
(1.65 in)
39 mm
(1.54 in)
172 mm
(6.77 in)
125 mm
(4.92 in)
246.5 mm
(9.70 in)
32.5 mm
(1.28 in)
82.5 mm
(3.25 in)
58.5 mm
(2.30 in)
58.5 mm
(2.30 in)
2. Place the track in the chassis.
NOTE:
For track with a direction of rotation mark
a
:
Install the track with the mark pointing in the direc-
tion of track rotation.
a
3. Install:
• Bearing holder
1
NOTE:
Align the punch mark
a
on the bearing holder
1
with the rivet
2
.
1
2
a
Summary of Contents for VK10L
