Yamaha TZR50 Owner'S Manual Download Page 79 | Manualshive

Page: 79 / 92

background image

4. To prevent corrosion, it is recom-

mended to apply a corrosion pro-
tection spray on all metal, inclu-
ding chrome- and nickel-plated,
surfaces.

5. Use spray oil as a universal clea-

ner to remove any remaining dirt.

6. Touch up minor paint damage

caused by stones, etc.

7. Wax all painted surfaces.
8. Let the motorcycle dry comple-

tely before storing or covering it.

EWA11131

Contaminants on the brakes or
tires can cause loss of control.

Make sure that there is no oil or
wax on the brakes or tires.

If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or
acetone, and wash the tires
with warm water and a mild
detergent. Before riding at hig-
her speeds, test the motorcy-
cle’s braking performance and
cornering behavior.

ECA10800

Apply spray oil and wax spa-
ringly and make sure to wipe
off any excess.

Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.

Avoid using abrasive polishing
compounds as they will wear
away the paint.

TIP

Consult a Yamaha dealer for
advice on what products to use.

Washing, rainy weather or humid
climates can cause the headlight
lens to fog. Turning the headlight
on for a short period of time will
help remove the moisture from
the lens.

EAU37222

Storage

Short-term
Always store your motorcycle in a
cool, dry place and, if necessary, pro-
tect it against dust with a porous
cover. Be sure the engine and the
exhaust system are cool before cove-
ring the motorcycle.

ECA10810

Storing the motorcycle in a
poorly ventilated room or cove-
ring it with a tarp, while it is still
wet, will allow water and humi-
dity to seep in and cause rust.

To prevent corrosion, avoid
damp cellars, stables (because
of the presence of ammonia)
and areas where strong chemi-
cals are stored.

Long-term
Before storing your motorcycle for
several months:

1. Follow all the instructions in the

“Care” section of this chapter.

NOTICE

NOTICE

WARNING

MOTORCYCLE CARE AND STORAGE

7-3

7

1HD-F819D-E0 7/3/11 20:27 Página 79

2AS-F819D-E0.indd 79

31/07/12 10:09

«
...
77
78
79
80
81
...
»

Summary of Contents for TZR50





























































































Reviews:

No comments

Related manuals for TZR50

Brand: Sachs Bikes Pages: 83

Brand: yasuni Pages: 8

Brand: VIKING BAGS Pages: 2

Brand: LAZER Pages: 19

Brand: Kong Pages: 72

SoundBomb TT-SB.10100.B

Brand: Denali Pages: 3

Brand: Memphis Shades Pages: 2

Two Fifty 250 cc

Brand: Mash Pages: 62

LOCK-IT 506007-7

Brand: hepco & becker Pages: 2

TXT PRO - PART LIST 2005

Brand: GAS GAS Pages: 38

Brand: Yamaha Pages: 82

Brand: Yamaha Pages: 84

Brand: Yamaha Pages: 90

Brand: Yamaha Pages: 83

Brand: Yamaha Pages: 148

Brand: Yamaha Pages: 96

Brand: Yamaha Pages: 108

Brand: Yamaha Pages: 190

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands