Yamaha TZR50 Owner'S Manual Download Page 30

Page: 30 / 92

With the engine turned off:

1. Move the sidestand down.

2. Make sure that the engine stop switch is set to “

3. Turn the key “ ”.

4. Shift the transmission into the neutral position.

5. Push the start switch.

Does the engine start?

With the engine still running:

6. Move the sidestand up.

7. Keep the clutch lever pulled.

8. Shift the transmission into gear.

9. Move the sidestand down.

Does the engine stall?

After the engine has stalled:

10. Move the sidestand up.

11. Keep the clutch lever pulled.

12. Push the start switch.

Does the engine start?

The system is OK. The motorcycle can be ridden.

The neutral switch may not be working correctly.

The motorcycle should not be ridden until

checked by a Yamaha dealer.

The sidestand switch may not be working correctly.

The motorcycle should not be ridden until

checked by a Yamaha dealer.

The clutch switch may not be working correctly.

The motorcycle should not be ridden until

checked by a Yamaha dealer.

YES

If a malfunction is noted, have a Yamaha

dealer check the system before riding.

WARNING

”.

INSTRUMENT AND CONTROL FUNCTIONS

3-15

1HD-F819D-E0 7/3/11 20:27 Página 30

2AS-F819D-E0.indd 30

31/07/12 10:09

Summary of Contents for TZR50





























































































Search results

Summary of Contents for TZR50

Reviews:

Related manuals for TZR50

Brands by name

Popular brands

Yamaha TZR50, Owner'S Manual

Search results

Summary of Contents for TZR50

Reviews:

Related manuals for TZR50

Brands by name

Popular brands