Yamaha TZR50 Owner'S Manual Download Page 27

Page: 27 / 92

EAU13590

Starter (choke) lever “

”

1. Starter (choke) lever

Starting a cold engine requires a
richer air-fuel mixture, which is sup-
plied by the starter (choke).
Move the lever in direction (a) to turn
on the starter (choke).
Move the lever in direction (b) to turn
off the starter (choke).

EAU13900

Seat

To remove the seat

1. Insert the key into the seat lock,

and then turn it as shown.

1. Seat lock

2. Open

2. Pull the seat off.

To install the seat

1. Insert the projection on the front

of the seat into the seat holder as
shown.

1. Projection

2. Seat holder

2. Push the rear of the seat down to

lock it in place.

3. Remove the key.

TIP
Make sure that the seat is properly
secured before riding.

INSTRUMENT AND CONTROL FUNCTIONS

3-12

1HD-F819D-E0 7/3/11 20:27 Página 27

2AS-F819D-E0.indd 27

31/07/12 10:09

Summary of Contents for TZR50





























































































Search results

Summary of Contents for TZR50

Reviews:

Related manuals for TZR50

Brands by name

Popular brands

Yamaha TZR50, Owner'S Manual

Search results

Summary of Contents for TZR50

Reviews:

Related manuals for TZR50

Brands by name

Popular brands