Yamaha TZR50 Owner'S Manual Download Page 16

Page: 16 / 92

INSTRUMENT AND CONTROL FUNCTIONS

3-1

EAU10460

Main switch/steering lock

The main switch/steering lock con-
trols the ignition and lighting systems,
and is used to lock the steering. The
various positions are described
below.

EAU10640

ON
All electrical circuits are supplied with
power, and the engine can be started.
The key cannot be removed.

TIP
The headlight, meter lighting and tai-
llight come on automatically when the
engine is started.

EAU10661

OFF
All electrical systems are off. The key
can be removed.

EWA10061

Never turn the key to “

” or “ ”

while the vehicle is moving. Other-
wise the electrical systems will be
switched off, which may result in
loss of control or an accident.

EAU10683

LOCK
The steering is locked, and all electri-
cal systems are off. The key can be
removed.

To lock the steering

1. Push

2. Turn

1. Turn the handlebars all the way to

the left.

2. Push the key in from the “

”

position, and then turn it to
“ ” while still pushing it.

3. Remove the key.

WARNING

1HD-F819D-E0 7/3/11 20:27 Página 16

2AS-F819D-E0.indd 16

31/07/12 10:09

Summary of Contents for TZR50





























































































Search results

Summary of Contents for TZR50

Reviews:

Related manuals for TZR50

Brands by name

Popular brands

Yamaha TZR50, Owner'S Manual

Search results

Summary of Contents for TZR50

Reviews:

Related manuals for TZR50

Brands by name

Popular brands