HANDLEBAR
5-42
2. Install:
• Throttle cable [carburetor (left cylinder)]
1
• Throttle cable [carburetor (right cylinder)]
2
To grip cap (lower)
3
.
NOTE:
Install the throttle cable [carburetor (left cylin-
der)] in the grip side slit
a
in the grip cap
(lower).
3. Install:
• Throttle
1
NOTE:
Apply the lithium soap base grease on the
throttle grip sliding surface.
4. Install:
• Throttle cable [carburetor (left cylinder)]
1
• Throttle cable [carburetor (right cylinder)]
2
To tube guide
3
.
NOTE:
• Apply the lithium soap base grease on the
throttle cable ends and tube guide cable wid-
ing portions.
• Install the throttle cable [carburetor (left cylin-
der)] in the grip side slit
a
in the tube guide.
5. Install:
• Grip cap (upper)
1
• Bolt (grip cap)
2
NOTE:
• Align the contacting surface
a
of the grip cap
(upper) with the punch mark
b
on the han-
dlebar.
• Tighten the bolts so that the upper side con-
tacting surface
c
is closed.
6. Adjust:
• Throttle grip free play
Refer to “THROTTLE CABLE ADJUST-
MENT” section in the CHAPTER 3.
CHAS
Summary of Contents for TZ250M
Page 1: ...5KE 28199 10 LIT 11626 13 41 OWNER S SERVICE MANUAL TZ250M1 M ...
Page 11: ...MEMO ...
Page 15: ...CHAPTER 7 TUNING ENGINE 7 1 CHASSIS 7 14 ...
Page 287: ...99 9 0 1x1 ...
