98
Tyros5 Owner’s Manual
Using External Audio Devices for Playback
The [LINE OUT] jacks are used to send the Tyros5 output to a keyboard amplifier, stereo
sound system or mixing console. If you are connecting the Tyros5 to a mono sound sys-
tem, use only the [L/L+R] jack. When only this jack is connected (using a standard phone
plug), the left and right channels are combined and output through this jack—providing a
convenient mono mix of the Tyros5’s stereo sound.
You can send a specific part to any
desired LINE OUT SUB jack. The opera-
tion display can be called up via: [MIX-
ING CONSOLE]
TAB [
][
] LINE
OUT. For details, refer to the Reference
Manual on the website.
To avoid possible damage, first
turn on the power to the instru-
ment, then to the external device.
When turning off the power, first
turn off the power to the external
device, then to the instrument.
Since this instrument’s power
may automatically be turned off
due to the Auto Power Off function
(page 17), turn off the power to
the external device, or disable
Auto Power Off when you do not
intend to operate the instrument.
NOTE
NOTICE
Phone pl
u
g
(standard)
Phone pl
u
g
(standard)
Inp
u
t jack
A
u
dio ca
b
le
Powered speakers
Switching the role of the LINE OUT SUB [3]–[4] jacks to AUX OUT jacks
You can switch the role of the LINE OUT SUB [3]–[4] jacks to AUX OUT jacks by the instrument’s display called up
via [MIXING CONSOLE]
TAB [
][
] LINE OUT. For details, refer to the Reference Manual on the website.
Do not route the output from the AUX OUT jacks to the AUX IN jacks. If you make this connection, the signal
input at the AUX IN jacks is output from the AUX OUT jacks, possibly resulting in a feedback loop that will make
normal performance impossible, and may even damage the equipment.
NOTICE
The output volume from AUX OUT jacks cannot be controlled by MASTER VOLUME.
NOTE
Summary of Contents for Tyros5-76
Page 122: ...122 Tyros5 Owner s Manual MEMO...
Page 123: ...Tyros5 Owner s Manual 123 MEMO...
Page 124: ...124 Tyros5 Owner s Manual...
